Drivers available for Windows 95/98/NT.
Easy Installation, Plug and Play with Windows 95/98
Features
Auto-adapts to V.90, K56flex or V.34 to match the fastest modem Internet service available
This 'plug and play' modem plugs into a PCI slot in the PC motherboard, providing high-speed analogue data, high-speed fax, audio/voice and speakerphone directly from a personal computer. It will 'auto-adapt' selecting V.90, K56flex, or V.34 automatically, to match the fastest compatible modem service from an Internet provider. (V.90 and K56flex are optimised for dial-up Internet access operating up to a theoretical maximum 56,000 bps from the Internet to the user and up to 33,600 bps from the user to the Internet). V.34 and lower speed operating modes are included, as well as error correction (V.42 / MNP 4) and data compression (V.42 bis / MNP 5) to eliminate errors and increase data throughput. Non error correcting mode is also available and the modem supports V.80 as required for H.324 video conferencing. Using the communications software provided, the modem will send faxes or answer incoming calls automatically, with both activities able to take place in background whilst the PC screen and operator are engaged in other activities. When a headset (or speakers) and a microphone are connected to the modem the communications software provides full duplex speakerphone facilities for hands free operation. With the telephone answering machine facility, a personal voice greeting may be recorded locally from a microphone or remotely by telephone and messages may also be retrieved locally and remotely. Free trials on the Internet are provided through starter CD packs included with the modem.
Technical specification
Operational Modes
V.90, K56flex (up to 56000 Rx), V34 (up to 33600bps), V32bis (14400bps), V32 (9600),
V22bis (2400), V22 (1200), V23(1200/75 asymetric), V21 (300) Async. full duplex data on
dial-up lines. Also supports V.80 (Synchronous Access Mode) as required for video-phone.
Fax Operation
V21, V22bis(2400), V27ter(4800), V29(9600), V17(14400)
Dial/Answer
Modes Autodial by command, Tone dial (Pulse dialing
chargeable extra), Auto-Answering to
V25
Error Correction
MNP 4, 10 and V.42
Data Compression
MNP-5 and V.42bis
Line Interface
Presented on RJ11/12 connector on rear panel . Modem is supplied with Telco-RJ line cable
Telco pair - pins 3&4. (RING signal derived on modem card)
Voice operation
2/4-bit ADPCM for Telephone answering machine Full Duplex Speaker-phone
Voice Record Source Remotely from Telephone Line
Voice Replay To Telephone Line
Audio Connectors
2 x 3.5mm Jack sockets for MIC and SPK
Voice Commands
Rockwell Industry Standard AT#V
PC interface
PCI 2.1 32-bit interface card. (Plug&Play) Speed 300bps to 230.4Kbps, Flow control
XON/XOFF or RTS/CTS5V PCI supply
Command Set HAYES Compatible, Extended AT command set.
Fax commands Class 1, 1.0
Dimensions
128mm x 110mm x 19mm (overall) (PCB 120mm x 98mm)
Software
Supplied with applications software (for Windows 95 or NT), to provide Full Duplex
Speakerphone, Answering machine, fax send/receive, fax back
and file transfer
Minimum PC spec
PC with a Pentium 200MMX processor, (or equivalents as provided by Cyrix or AMD), 8 MB
RAM, Windows 95 or NT operating system with Dial-Up Networking, 15 MB free disk space,
Sound card or Motherboard with Telephony connector for speakerphone, VGA monitor, CD-ROM
drive for loading software, Spare PCI slot to accept the modem.
Other Features BABT approved, CE marked